How to choose to reassuringly, price moderate, safe to drink a sports  bottle the important issues should not be ignored.

After careful comparison and study, oerall, choose movementcanteen points can be divided into three words: durable, reliable and convenient insurance.

                       "The key is durable" pot body material and thickness

Movementcanteen material for aluminum and aluminum products in China, a country in material selection, complete, each have different manufacturers, many domestic brand mark used for the kettle purity pure 99.5% actual situation, but was not so, even the most vendors are using renewable aluminum.

Another factor is the canteen, general movementcanteen wall thickness of the wall thickness is 0.7 mm. Due to the general consumers to identify movementcanteen wall thickness, some firms to reduce cost, speculative will kettle thinned to save material, some manufacturers will even thinned to 0.5 mm. Judge a kettle pot wall thickness is directly in my hand, if feel thick and thin, reduce the weight of the kettle will lighter.

If movementcanteen choose aluminous purity is not high, or wall thickness jerry, in use, easy for collision or drops and depression, the even burst. General movementcanteen selects the high purity of aluminum, wall thickness, movementcanteen strength and toughness will be better, impact resistance and impact of ability is stronger also. Of course, the better the quality cost and price also can be increased accordingly.

                      "Safe" is the key of the kettle coating movement

As is known to all, excessive intake of aluminum, will cause bigger to human body health, sports bottle coating solution is to isolate the problem: the water inside movementcanteen, fruit juice and milk, coffee drinks and aluminum pot body isolated.

Kettle movementcanteen coating ingredient is 20% more resin, 1% of additives, the rest are solvents. Movementcanteen quality reliable, whether the main determinant of raw materials, the first is the coating is safe, not to itself, in addition to harm human health is the coating quality of coating in the kettle inside whether uniform spraying, adhesion, and achieve the necessary thickness, thus ensuring drinks and aluminum pot body segregation of reliability.

Under intense pressure of competition, and export to reduce cost, increase competitiveness, the current domestic manufacturer chooses mostly are cheap raw material, coating and limited size and strength, the equipment and technology are hard to ensure movementcanteen coating spray quality.

The coating movementcanteen must meet the health requirements, but through due to lack of supervision and inspection, the current domestic movementcanteen, except a few products manufacturer of large scale, market of the coating products cheap almost all existing problems.

                    "Convenient" is the key to whether the lid. Structure,

General movementcanteen is the lid of lid and gasket two parts. In use process, general movementcanteen due to quality cont-rol, not because of the screw washer too tight squeeze, a long time from the cold or hot temperature and plugged in factors, even from the lid, the use of trouble, sometimes lost and influence of the kettle use again.

Good sports bottle injection technology, and the second will washer and lid directly, both reached good seal, fundamentally eliminate the possibility of out.

                  "Insurance" is the key part of the sealing plugged

The sealing parts plugged depends on the lid and plugged between threads. If the inosculation isn't high enough, in normal use process will be porous phenomenon, and will bring a lot of inconvenience to use, it must be many people there have been some unpleasant experience.